
Power Management ICs (PMIC / PMU)
343S00118 Power Management IC (Big) for iPad Pro 10.5 (2017)
$6.63
from $5.97 at 10+
iPad
Open Settings > General > About and tap the Part Number line to see the model number (it starts with A). It is also printed in small type on the back of the iPad.
Models in the same range often look alike but use different parts. Open your exact model's page or check the compatibility list on each product.
On many models the charging flex also carries microphones or antenna contacts, so compare it with the old part before you fit it.
Disconnect the battery before you work near the board, and replace a swollen battery straight away rather than reusing it.
Glued back glass usually needs heat or a laser machine to remove. A housing swap replaces the whole frame instead.
FPC connectors are soldered to the board. Match the pin count and check if you need the board side or the flex side.
iPad Pro 12.9-inch (1st generation), iPad Pro 9.7-inch, iPad Pro 10.5-inch, iPad Pro 12.9-inch (2nd generation), iPad Pro 11-inch (1st generation), iPad Pro 12.9-inch (3rd generation), iPad Pro 11-inch (2nd generation), iPad Pro 12.9-inch (4th generation), iPad Pro 11-inch (3rd generation), and iPad Pro 12.9-inch (5th generation).
Open Settings > General > About and tap the Part Number line to see the model number (it starts with A). It is also printed in small type on the back of the iPad.
Rarely all of them. Some small parts are shared, but screens, batteries and housings usually differ by model. Each product lists every model it fits.
Showing 1–7 of 7 products

Power Management ICs (PMIC / PMU)
$6.63
from $5.97 at 10+

Power Management ICs (PMIC / PMU)
$6.63
from $5.97 at 10+

Power Management ICs (PMIC / PMU)
$5.52
from $4.97 at 10+

Power Management ICs (PMIC / PMU)
$5.52
from $4.97 at 10+



Charging & USB ICs
$6.63
from $5.97 at 10+