2UUL PW01 Ultra Soft Power Line for iPhone 6 to 15 Pro Max

Board-level iPhone work often means powering a logic board from a bench supply for hours, and a stiff lead can tug the connector off mid-test. The PW01's selling point, according to its title, is an ultra-soft line for iPhone 6 to 15 Pro Max boards.

The PW01 is a power line from 2UUL. Its title names the iPhone 6 to 15 Pro Max, but the description is generic text about DC cables, mentioning barrel plugs and devices such as routers and monitors, and never describes the iPhone connector.

When a bench power line is needed

• Powering a phone that won't boot to check its current draw.

• Testing a board after a short or water damage.

• Keeping a board powered during component replacement.

• Replacing a worn or broken power lead on the bench.

Check before ordering

Because the description doesn't match the title, confirm in the photos which connectors are on each end and how it attaches to your supply. If you need a set covering both iPhone and Android, the 2UUL PW02 lists its cables and hub in detail.

Whatever lead you use, match the supply voltage to the phone's battery and start with a low current limit. Watch the meter as you press the power button: a reading that jumps straight to the limit points to a short, while no draw at all suggests a problem before the power circuit.