DJI Mavic 2 Pro / Zoom Arm Motor Assembly

A Mavic 2 that suddenly reports a motor error, or lands with one motor grinding, usually needs that corner replaced. This arm motor assembly comes pre-assembled, combining the arm and motor so the repair is a single swap.

This arm motor assembly is listed for the DJI Mavic 2 Pro and Mavic 2 Zoom in front-left, front-right, rear-left and rear-right options. No maker is named; it's sold as aftermarket.

When a Mavic 2 arm motor assembly is needed

• Motor errors or a refusal to take off.

• A grinding, rough or overheating motor.

• A broken arm along with motor damage.

• Uneven flight traced to one corner.

Assembly or motor only?

If only the motor has failed and the arm is sound, a standalone Mavic 2 arm motor is also listed at a lower price. The pre-assembled option saves time when the arm is also damaged. Front assemblies are priced slightly higher than rear ones.

Photograph the wiring layout before removing the old assembly. After fitting, check that the arm folds and locks firmly, run a motor test if available, and hover close to the ground before flying normally.