QUICK 236 Intelligent Lead-Free Soldering Station

Lead-free solder melts hotter and freezes faster than the old tin-lead mix, and a weak station leaves dull, grainy joints. The QUICK 236 is a 90 W lead-free station with a range of 80 to 480°C and a digital LED display.

The listing mentions temperature calibration, an ESD-safe design and replaceable tips. The spec table says AC 220 V with an EU plug, while the options also offer AU 220 V and US 110 V versions. Tip type and package contents aren't given, so check the photos for the handle and stand.

When it earns bench space

• Grainy, cracked joints from underpowered irons.

• Charge port and connector pins with heavy ground pads.

• Static-sensitive ICs near the joint.

• Tips that drift and need calibration.

Settings

Most lead-free work flows at moderate settings with good flux; push higher only for large ground planes. Calibrate against a tip thermometer if joints start looking dull, and recheck after every tip change because each tip reads slightly differently.

Pick the plug and voltage that match your mains. For heavier ground work, it has more headroom than basic analog stations.